# BCM94704mpcb board
# $Copyright (C) 2003 Broadcom Corporation$
# $Id: bcm94704mpcb-cb.txt,v 1.3 2007-05-03 19:20:48 mtanner Exp $
boardtype=0x0472
boardnum=${serno}
# Board revision 4.4
boardrev=0x44
# BCM5325 RoboSwitch requires reverse MII initialization
boardflags=0x10

# MIPS clock frequency in MHz
clkfreq=264

cardbus=1

# 64 MB DDR SDRAM (4 Meg x 16 x 2)
sdram_init=0x0149
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0

# BCM5325F
et0macaddr=00:90:4c:a0:${maclo}
et0phyaddr=30
et0mdcport=0

# BCM5325F Wan port
et1macaddr=00:90:4c:a1:${maclo}
et1phyaddr=4
et1mdcport=0

# BCM5325F reset
gpio0=robo_reset

# SES Button on GPIO 6
gpio6=ses_button

# Bootloader variables
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
boot_wait=on

# Watchdog timer in ms
watchdog=3000

# Reset 
reset_gpio=7

# Set parkid=<x> where <x> is the pci slot containing the MIMO radio.
# On BCM94704MPCB parkid=0 for miniPCI, parkid=1 for CB, parkid=2 for PCI.
parkid=1
